Category：Rolling machine
Mechanical model: TDJM-5L-0606
Machine name: 0606 type coil extraction finishing mill
Processing capacity: 1.0*1.0mm-6.0*6.0mm
Production speed: 0-31.8M/min
Power: 11.25KW
Uses: rolling copper, iron, aluminum, titanium, stainless steel and other metal wires, frequency conversion speed regulation
Product shape: triangle, hexagon, square, flat, oval, semicircle and other irregular shapes
Coil Finishing Rolling Mill: It is used to roll metal wire rods into special-shaped materials. Compared with two-roll mills, its rolling shape is more complicated, the precision is higher, and the rolling volume is slightly smaller, so it is more suitable for wire rod finishing rolling. The rolling mill includes: the straight and straight polishing machine, the driven rolling unit, the tension coil drawing machine, and the rewinding machine part. The functions of each part are introduced as follows. The processing capacity of each type of coil drawing finishing mill can be seen in the parameter table.
Straightening and polishing machine: 1. This treatment process effectively improves the surface quality of the finished product.
2. It is not suitable to use surround polishing machine for processing thinner wires.
3. When the wire is thick, push into the straightener by the pusher,
4. Three sets of straighteners. Before polishing, there are two sets of straighteners, one of which is horizontal and the other is vertical. After polishing, the other is to stabilize the material and further straighten.
5. The polishing part will polish the material on four sides to remove the surface debris, dust, and squandering caused by the pre-processing and handling of the material. The machine itself can clean and take away the dust and debris generated by polishing.
Driven rolling mill:
1. The stand and each group of driven rolling mills can be disassembled, so according to different products, different types of driven rolling mills can be used together. The details of different types of driven rolling mills are described in the column of driven rolling mills in this book.
2. Equipped with a cooling circulation system to wash, cool and lubricate the material and rolls, and filter and clean the contaminated cooling oil after the material is washed to continuously ensure the smooth and clean surface of the product.
Tensile coiling machine: The double coil drawing wheel is used to pull the material to ensure that the material can be pulled out evenly and steadily from the moving rolling mill, effectively protecting the roll and obtaining better product quality; the special structure design makes the material on the coiling wheel It can be arranged smoothly, effectively solving the overlapping of super-wide materials in the winding process, and the maximum non-overlapping winding width can be adjusted.
Receiving machine part: according to the set constant tension, the material rolled out of the rolling mill is wound up, which can adapt to any changes in the production speed of the main rolling mill; the polished rod wire arranging device pushes the material to be arranged in layers and reciprocally take up on the wire tray Upper; the outer retaining flange can be loaded with and unloaded materials.
